Storm windows can appreciably beautify your home’s power efficiency and comfort by means of presenting an extra layer of protection in opposition to the elements. To make certain your typhoon home windows suit properly and serve their cause efficaciously, it’s critical to take correct measurements. In this guide, we will walk you through the steps on a way to measure typhoon home windows.
Tools You’ll Need
Before you get started, make sure you have the following tools and materials on hand:
- Measuring tape: A flexible, retractable measuring tape is essential for accurate measurements.
- Notebook and pen: You’ll need these to record your measurements.
- Ladder: If your windows are out of reach, a stable ladder will be necessary.
- Assistant: Having an extra set of hands can be quite helpful, especially for larger windows.
Step 1: Identify the Type of Storm Window
Earlier than you start measuring, you need to determine the type of hurricane window you want to put in. There are numerous alternatives available, including exterior and interior hurricane windows, as well as full-body or insert-style models. Your desire will have an effect on the way you degree and deploy the hurricane windows.
Step 2: Measure the Window Frame
Start by measuring the window frame accurately. To do this:
Width Measurements:
- Inside Width: measure the internal width of the window body from one side (jamb) to the other. Take measurements on the pinnacle, middle, and backside of the window. It is important to degree the narrowest width, as typhoon windows must suit this area.
- Doors Width: degrees the outside width of the window body in the identical way, from one jamb to the alternative, at the top, middle, and bottom. Notice those measurements for reference.
- Subtract the inner Width from the outdoor Width: This calculation will come up with the thickness of the window body. It allows decide whether you want outdoor or indoor hurricane windows.
Height Measurements:
- Inside Height: Measure the inside height of the window frame from the sill to the head jamb. Like with the width, measure at several points and record the shortest measurement.
- Outside Height: Repeat the process for the outside height, measuring from the sill to the head jamb.
- Subtract the Inside Height from the Outside Height: This calculation provides the depth of the window frame.
Step 3: Check for Squareness
Measure the diagonals of your window frame. If the two diagonal measurements are equal, your window frame is square. If they’re not equal, record both diagonal measurements and notify your storm window manufacturer or supplier. They may need to provide custom storm windows to accommodate the non-square frame.
Step 4: Measure the Depth
Measure the depth of the window frame from the innermost point to the outermost point. This measurement is crucial for determining whether you need interior or exterior storm windows.
Step 5: Record Additional Information
Take note of any obstacles or obstructions near the window, such as window cranks, handles, or other hardware. These factors can impact the design of your storm windows, so it’s important to provide this information to your supplier.
Step 6: Consult with a Professional
If you’re unsure about any aspect of measuring storm windows or if your windows have unique features that require special consideration, it’s a good idea to consult with a professional or manufacturer. They can offer guidance and ensure that you get the right storm windows for your specific needs.
Welcome to our blog We encourage you to get in touch Contact us